FlexStep Pro

The FlexStep Pro is a very simple product to install, easy to follow instructions are included in the kit.

The included hardware is designed to install the FlexStep to any boat trailer with frames 2 to 3 inches wide and up to four inches deep.

If your trailer frame is larger, you will need to purchase longer bolts separately at any hardware store or chandlers.

Step 1

Choose Your Location.Place the base mount on the trailer frame in the location of your choice.

Step 2

Install the Base Mount and Backing PlateTake the four bolts and place them through the mounting plate and align with the trailer frame. Protective sleeves are provided to sheath the bolts and prevent scratches where they could come in contact with the trailer frame. Place the backing plate on the back or rear side of the trailer frame and align the four bolts through the corresponding holes. If you are mounting it to the trailer tongue, place it on the underside of the frame. Place the backing plate on the back or rear side of the trailer frame and align the four bolts through the corresponding holes. If you are mounting it to the trailer tongue, place it on the underside of the frame.

Step 3

Step and Receiver Insert the step into the step receiver, align the holes where desired, and insert the 2-inch locking pin.

Download instructions